TINJAUAN BAHAYA DAN RISIKO DENGAN METODE HAZOP PADA PROSES PRA CETAK DI PT PUTRA NUGRAHA SENTOSA

Listiawan, Hary (2022) TINJAUAN BAHAYA DAN RISIKO DENGAN METODE HAZOP PADA PROSES PRA CETAK DI PT PUTRA NUGRAHA SENTOSA. Diploma thesis, Politeknik Negeri Media Kreatif.

[thumbnail of TINJAUAN BAHAYA DAN RISIKO DENGAN METODE HAZOP PADA PROSES PRA CETAK DI PT PUTRA NUGRAHA SENTOSA] Text (TINJAUAN BAHAYA DAN RISIKO DENGAN METODE HAZOP PADA PROSES PRA CETAK DI PT PUTRA NUGRAHA SENTOSA)
Preliminary_19001027.pdf - Accepted Version
Available under License Creative Commons Attribution Share Alike.

Download (1MB)

Abstract

PT Putra Nugraha Sentosa merupakan industri yang bergerak di bidang percetakan dan pengemasan komersial. Salah satu proses yang memegang peranan penting dalam produksi kemasan adalah proses pra cetak. Apabila pada proses ini mengalami kendala yang disebabkan oleh kecelakaan kerja, akan berdampak pada keberlangsungan proses produksi dan produksi cetak kemasan dapat terhambat. Untuk itu perlu dilakukan sebuah analisis bahaya dan risiko pada proses pra cetak. Salah satu metode yang digunakan untuk mengidentifikasi dan menganalisis risiko adalah metode HAZOP. Berdasarkan hasil pengamatan yang dilakukan, terdapat 22 temuan sumber bahaya yang ada di pra cetak. Masing-masing terdiri dari 3 temuan sumber bahaya di divisi PPIC, 3 sumber bahaya di divisi desain, dan 16 sumber bahaya di divisi CTP. Dari 22 temuan sumber bahaya, terdapat satu (1) sumber bahaya dengan tingkat risiko yang tergolong rendah dan terdapat dua (2) sumber bahaya dengan tingkat risiko yang tergolong sedang di divisi PPIC dan sama halnya di divisi desain. Serta terdapat tujuh (7) sumber bahaya dengan tingkat risiko yang tergolong rendah, terdapat enam (6) sumber bahaya dengan tingkat risiko yang tergolong sedang, dan terdapat tiga (3) sumber bahaya dengan tingkat risiko yang tergolong tinggi di divisi CTP. Pengamatan ini menghasilkan rekomendasi perbaikan pada proses pra cetak, fasilitas, dan Sumber Daya Manusia (SDM) di PT Putra Nugraha Sentosa tersebut.

PT Putra Nugraha Sentosa is an industry engaged in printing and commercial packaging. One of the processes that plays an important role in packaging production is the pre-press process. If this process experiences problems caused by work accidents, it will have an impact on the sustainability of the production process and the production of packaging printing can be hampered. For this reason, it is necessary to conduct an analysis of the hazards and risks in the pre-press process. One of the methods used to identify and analyze risks is the HAZOP method. Based on the results of observations made, there are 22 findings of sources of danger in the preprint. Each consists of 3 findings of sources of danger in the PPIC division, 3 sources of danger in the design division, and 16 sources of danger in the CTP division. Of the 22 findings of the source of danger, there is one (1) source of danger with a relatively low level of risk and there are two (2) sources of danger with a moderate level of risk in the PPIC division and the same in the design division. And there are seven (7) sources of danger with a relatively low level of risk, there are six (6) sources of danger with a moderate level of risk, and there are three (3) sources of danger with a relatively high level of risk in the CTP division. This observation resulted in recommendations for improvements in the pre-press process, facilities, and Human Resources (HR) at PT Putra Nugraha Sentosa.

Item Type: Thesis (Diploma)
Additional Information: 1. Elviana, S.TP., M.Si 2. Ir. H.M. Didik MS, B.Sc.Graf
Uncontrolled Keywords: Bahaya, Risiko, HAZOP, Kesehatan dan Keselamatan Kerja, Percetakan.
Subjects: N Fine Arts > NE Print media
T Technology > T Technology (General)
Divisions: Polimedia Jakarta > Jurusan Teknik Grafika > Prodi Teknik Kemasan
Depositing User: Hary Listiawan
Date Deposited: 09 Sep 2022 01:44
Last Modified: 09 Sep 2022 01:44
URI: http://repository.polimedia.ac.id/id/eprint/1077

Actions (login required)

View Item
View Item